Jaeger USA is the Private Label Manufacturing Partner
Specializing in both Air and Waterproofing Solutions for the Construction Industry.
Products are designed to save time, prevent moisture, water, and air leakage in the building envelope.
Visit our family of products:
Within the product families you will find; waterproofing sheet membranes for both above and below grade application, accessories for shower installation systems, water, air, and vapor-permeable sealing tapes, sub-floor uncoupling membranes, and components for textile, shoe, leather, and tolling services.
Air, Water, and Vapor
Barrier System Components
Membranes

Exterior Sealing Systems
Fully Bonded Sheet Membrane
Doubleflex Fully Bonded Sheet Membrane

Doubleflex Fully Bonded Sheet Membrane
Components for Waterproofing
Typical Application Areas
-
Foundation walls
-
Basements
-
Tunnels
-
Garages
-
Below Grade
-
All other Concrete Structures

How Does It Work?
Jaeger USA introduces an innovative waterproofing membrane, Doubleflex Fully Bonded Sheet Membrane (FBV), to expand its versatile waterproofing portfolio under its Private Label Sealing Systems brand. Doubleflex Fully Bonded Sheet Membrane (FBV) is a pre-applied, high-density polyethylene (HDPE) sheet waterproofing membrane treated with a unique pressure-sensitive adhesive and protective coating to enable strong adhesion with concrete surfaces without requiring additional protective screed.
Complete Sealing System
• It works as a complete sealing membrane with special butyl application
• Waterproofing tape for overlapping on top (behind the membrane, peel & stick system)
• Internal and external corners with self-adhesive butyl (peel & stick system)
• Collars for pipe penetrations
• Used in all applications, where structures have to be protected against groundwater and seepage.
• For the waterproofing of foundation walls, basements, tunnels, garages, and all other concrete constructions below grade.
• The 2-ply membrane consists of a needle-punch non-woven and FPO high-performance waterproofing membrane.
• Additional self-adhesive butyl strip along one side (100 mm).
Key Technical Features
In Combination with
Freshly Poured Wet Concrete
The 2-ply membrane consists of a needle-punch non-woven and FPO high-performance waterproofing membrane.
Jaeger USA’s Doubleflex Fully Bonded Sheet Membrane is a self-sealing system for a fast and simple installation process without the need for chemical-based construction sealants.
Jaeger USA’s Doubleflex Fully Bonded Sheet Membrane achieves its full sealing function in combination with freshly poured wet concrete. The sheet membrane when used in combination with fresh concrete on the side with the special non-woven fleece and the other side in contact with the substrate floor or wall surface to prevent the leakage of moisture (capillary action or retained water) or seepages from water under pressure.

The permanent mechanical bond created by the fresh concrete completely embedded into the fleece prevents any lateral water underflow between the Jaeger USA's Doubleflex Fully Bonded Sheet Membrane and the hardened reinforced concrete of the structure.
Key Technical Features
Jaeger USA’s Doubleflex Fully Bonded Sheet Membrane is specifically designed and engineered for use with ICF technology (Insulated Concrete Forms). It is also an excellent choice for use on poured walls, CMU (Concrete Masonry Unit) foundation walls, and related applications where waterproofing is critical.
-
The bond begins when the non-woven comes into contact with the fresh concrete.
-
After drying time about 70N / 50 mm (peeling test).
-
Water pressure: minimum 5 bar.
Protection From
Outside Elements
-
Peel test on the overlapping area - Internal 20 N / 20 mm.
-
Water migration test (T-joint) - External ≥ 1.5 bar.

-
Protection against water migration.
-
DIN EN 1928 type A.
-
Migration size of 5 mm.
-
Tests after 7 days & 28 days.
Installation Instructions
Doubleflex Fully Bonded Sheet Membrane Installation Instructions
Membrane:
Coverage:
Self-adhesive strip:
Flexible Polyolefin (FPO)
Modified Polypropylene needle-punch non-woven
Butyl rubber, highly elastic, resistant to aging, and release liner

Material Composition
Jaeger USA self-adhering Doubleflex Fully Bonded Sheet Membrane is 40 mils thick. Consisting of a strong pliable high-density polyethylene (HDPE) facing bonded to a rubberized asphalt waterproofing compound that has been proven over many years of use to a be supremely effective waterproofing material.
Accessories
Jaeger USA’s Doubleflex Fully Bonded Sheet Membrane Corners are a durable one-piece polymetric corner accessory that helps ensure air and watertight hard to reach places when used with Jaeger USA’s Waterproofing Membrane System. Installation of an above-grade or below-grade moisture barrier can be difficult to get the membrane to fit into every nook and cranny. These corners are easy to install and provide peace of mind for areas notoriously difficult to detail correctly.
Use them with Jaeger USA’s entire Waterproofing Membrane System, flashing strips, and other moisture protection products to form a tight seal and prevent leaks that can quickly spread. They are ideal for residential and light commercial construction to prevent mold, mildew, and rot.